Temperature control systems
EUROTHERM 3216 CG CONTROLLER
This 48 X 48mm unit offers a single adjustable ramp to
one permanent dwell temperature. This feature is useful for gentle
heating of ceramic work tubes or samples and can limit the cooldown
rate when the temperature is reduced. Both the set temperature
and the actual measured furnace temperature are simultaneously
displayed.
EUROTHERM 2416 CG PROGRAMMER
This 48 x 48mm unit adds to the features of the 2116 alowing
you to preset both the rate of temperature rise or fall, and
the length of time at a constant temperature. A total of 8 segments
each of which can be used as a ramp, step or dwell.
EUROTHERM 2408 CP PROGRAMMER
This 48 x 96mm, high stability instrument extends the
features of the 2146 and allows you to preset programmes of 16
segments, each of which can be used as a ramp, step or dwell.
OTHER PROGRAMMES
Eurotherm 2408 P4 and 2408cm as the 2408 CP but facility to
store 4 or 20 programmes each of 16 segments
Please note many other systems are available, please contact
our design team for more information.
Optional Extras
Overtemperature protection
An independant overtemperature protection system to give protection
for both the furnace or any furnace contents at any temperature.
Using an additional Eurotherm alarm working from a seperate thermocouple.
Digital Communications
RS232 allowing a single controller to communicate with a computer
.
RS485 Allowing multiple controllers to communicate by "Daisychaining"
Software
Dos or Windows software is available
Cascade control
Available when close monitoring of the work load is important
an additional thermocouple is placed close to the load and a
second controller is fitted. The thernocouple sends signals to
the normal temperature controller which in turn adjusts the element
temperature.
Chart Recorders
A wide selection of both analogue and graphic recorders are available
on request.
