|
|
 |
|
Glossary
Designed to give correct throughput of oxygen through the chamber to ensure complete determination of ash, typical users food analysis and agricultural research. Calibrated Ovens Calibrated Ovens for use up to 700deg c for use in conjunction
with AMS 2750D standards. Complete range of electric furnaces for both single and 3
phase (where needed) Our range of heat treatment furnaces can be used for both
hardening and tempering (high and low temperatures) Heat Treatment Ovens Basically as with calibrated ovens, but can be used as simply a drying or curing ovens where the temperature uniformity does not have to meet any calibration specification. High Temperature Furnaces For processes such as sintering up to 1800deg c. Industrial Furnaces Required when the standard range of industrial furnaces is
too small, typically chamber furnaces up to 1200deg and up to
1mt cube (and larger) Industrial Hot Plates Mainly built to customer specification comprising heavy duty
plate on legs typical sizes already done 1mt square, temperatures
up to 300 / 400deg c depending on environment. As with calibrated ovens most likely to be large chamber to cope with size of work pieces, with air operated door. Laboratory Furnaces Covers most ranges of furnaces, muffles, tubes, high temp etc, which are typically used in research labs and University labs, these laboratory furnaces are usually within the standard size range. Hard wearing refractory muffle furnaces (liner) especially good where work pieces may be heavy as this type of furnace is very hard wearing, provides a hard wearing surface for work pieces to be placed on. Tube Furnaces are ideal for chemical analysis and analytical
research where gas tight ends can be fitted to a work tube (which
cannot be done in other types of furnaces) tube furnaces can
be designed for both horizontal and vertical format if required.
Tel: 01246 260094 Fax: 01246 450213 Email: enquiries@vecstar.co.uk |